1 Leap Technologies

Key Features

• Heavy Duty Roller Shutter Contact
• Sturdy Polished Aluminium Die cast Housing
• Magnet Mounted on adjustable L Bracket
• Wide Operating Gap 2″ min. (50mm) min.
• Magnet Mounted on adjustable L Bracket
• 3′ Long PVC Cable

Overhead Mount Magnetic Switches work similar to relays, closing an electrical contact in the presence of a magnetic field. A nearby magnetic field from either an electromagnet or permanent magnet pulls one contact against the other, closing the switch. When the magnetic field is removed, the spring action in the stiff metal contacts opens the connection. Because the thin contacts have low mass, they can operate up to 10 times faster than conventional relays with similar ratings.

• Contact Rating : 10W/VA
• Switching Voltage (Max.) : 200 VDC
• Switching Current (Max.) : 0.5 Amp.
• Contact Resistance (Min.) : 150 milli ohms
• Life Expectancy : 10 x 10??? Operations
• Insulation Resistance : 10 9 ohms
• Shock Resistance : 30G for 11 mSec.
• Vibration Resistance : 20G ( 10 to 1000Hz)
• Plastic Material : ABS Plastic (Unless otherwise specified)

The 1L-MSM-112 is a surface mount reed switch that operates through magnetic activation. When the supplied magnet approaches the switch body, the internal reed contacts change their electrical state depending on the selected configuration. This model is available in Normally Open (NO), Normally Closed (NC), and NO/NC (changeover) variants, allowing system designers to choose the exact switching logic required for their application.

• Surface mount design with screw mounting and optional adhesive tape
• Side flanges for quick and secure installation
• 18" long wire leads for suitable wiring
• Operate gap of 10.0 mm minimum
• Mounting spacer available on request

The 1L-MSM-112 is a surface mount reed switch that operates through magnetic activation. When the supplied magnet approaches the switch body, the internal reed contacts change their electrical state depending on the selected configuration. This model is available in Normally Open (NO), Normally Closed (NC), and NO/NC (changeover) variants, allowing system designers to choose the exact switching logic required for their application.

1 LEAP Magnetic door / Window sensor wired for internet of things, iot, arduino, raspberry pi, nodemcu etc. This switch detects whether door / window is Open or Close.  It has two parts the magnetic part is attached to door/window and other wired part is fixed to the door/window frame. Switch type: NO (Normally Open).  Switch type: Magnetic  This switch can be used with arduino, raspberry pi, nodemcu, iot, internet of things used in alarm system / theft alarm system on iot. Reed Switch Specifications Contact Rating : 10W/VA Switching Voltage (Max.) : 200 VDC Switching Current (Max.) : 0.5 Amp.  Contact Resistance (Min.) : 150 milli ohms Life Expectancy : 10x 10 6 Operations Insulation Resistance : 10 9 ohms Shock Resistance : 30G for 11mSec.  Vibration Resistance : 20G ( 10 to 1000Hz)  Magnets : ALINCO/ Rare Earth (Unless otherwise specified)  Armour Jacket : Stainless Steel (Type 304)  Plastic Material : ABS Plastic (Unless otherwise specified Note to Buyers: DO NOT CONNECT IT DIRECTLY TO ANY HIGH CURRENT LOAD. It requires a driver circuit or Relay to connect to a high current load. Over current through the sensor will instantly damage it.

The 1L-MSM-114OH has a wide contact switch, which can function effectively even under conditions of overhead shutters, especially when there may be variations in positioning and even some mechanical actions. The Z-type mounting bracket makes it convenient for installing, along with maintaining correct positioning even when operating.