1 Leap Technologies

360° Ceiling Mount Occupancy Sensor is a fully automatic dual indoor security/courtesy light controller capable of controlling up to 2000W. This product acts as a great energy-saving switch and has good sensitivity and an integrated circuit. This is a dual range, dual sensor. During night, the built-in passive infrared (PIR) motion sensor turns on the connected lighting system, when it detects motion in its coverage area. During the day, the built-in photocell sensor saves electricity by deactivating the lights.

The 360° Ceiling Mount Occupancy Sensor is a dual Sensor Switch which detects the Infrared Rays released by the human body. The light or any other electrical appliance can be activated automatically by the active presence of a human body within the detection range/coverage area & when there is no active human presence the light will be deactivated automatically. An adjustable time knob lets you select how long the light stays on after activation. Hence a considerable amount of electricity cost is saved by the use of Sensor.

• Built-in Photocell detects Day & Night.
• LUX Level Control & Time Control
• Re-trigger Function, Time Delay added (Upon every detection time is set to zero)
• Adjustable Time Delay (10sec ± 3sec(preferable time 60sec). The maximum time is 30min±2min.
• Stand alone 220V AC operation
• Very easy to Use & Install (DIY)

• Operating Volt: 220-240VAC/50Hz,
• Load: 1000W/2000W Max
• Ambient Light: 3-2000 LUX (Adjustable),
• Load Type: Bulb, LED light, CFL, Fans, etc.,
• Detecting Dist.: 20M max. (,24°C),
• Detecting Angle: 360°,
• Installation Height: 2.2-6 Mtr.
• Power Consumption: 0.1W (static) & 0.4(Work),
• Working Humidity: less than 93 % RH,
• Delay: 10 ±3 sec. – 30 ±2 min. (Adjustable)

360° Ceiling Mount Occupancy Sensor with IR Remote is a fully automatic dual indoor security/courtesy light controller capable of controlling up to 2000W incandescent or 1000W fluorescent lightings. The unit is not only a lighting controller, but also has the capability of detecting slight motion within a radius of 3 meters around the sensor. It will keep the connected lighting fixture continuously on even when you are seated and is able to detect very slight movements (a seated person’s head or hand movements).


The 360° Ceiling Mount Occupancy Sensor with IR Remote is a dual Sensor Switch which detects the Infrared Rays released by the human body. The light or any other electrical appliance can be activated automatically by the active presence of a human body within the detection range/coverage area & when there is no active human presence the light will be deactivated automatically. An adjustable time knob lets you select how long the light stays on after activation. Hence a considerable amount of electricity cost is saved by the use of Sensor.

• Operating Volt: 220-240VAC/50Hz,
• Load: 1000W/2000W Max
• Ambient Light: 10-500 LUX (Adjustable),
• Load Type: Bulb, LED light, CFL, Fans, etc.,
• Detecting Dist.: 3m radius (Height 2.5m) Micro Motion, 6m radius (Height 2.5m) Walk Across Motion,
• Detecting Angle: 360°,
• Installation Height: 2.5-3.5 mtr.
• IR Controller: Channel 1 & 2, Auto / On / Off
• Power Consumption: 0.1W (static) & 0.4(Work),
• Warm-up Time: About 90 sec.,
• Delay: 5 sec. – 15 min. (Adjustable)