1 Leap Technologies

• The Sensor is weather proof
• LUX Level adjustment can be done
• Control unit with external sensor
• Can be installed with any light
• Stand alone 220V AC operation
• Very easy to Use & Install (DIY)

• Street Light
• Garden Light
• Boundary Light
• Hoarding Lights

• Operating Volt: 220-240VAC
• Power Frequency : 50 Hz
• Rated Current : 20 Amp.
• Working Temperature : -20°~+40°C
• Ambient Light: <2-100 LUX (Adjustable),
• Load Type: Bulb, LED light, CFL, Halogen Light, etc.,
• Working Humidity: <93 % RH

Great solution for Energy Saving Easy in Installation (DIY). Can be used with lamps, incandescent lamps (bulbs), old-fashioned fluorescent lamps, electronic fluorescent ring lamps, spotlights, transformers, etc   1 LEAP PIR Motion Sensor The Product is an Energy Saving Device, which adopts good sensitivity detector & integrated circuit. It provides Convenience, Safety & Saves Energy.It works by receiving Human motion Infrared rays. Now Switch ON/OFF your Lights, Bulb, etc. AUTOMATICALLY Using 1 LEAP SENSOR Life: More than 5 years Use: Home, Office, Shops, Hospitals, Bathroom, Corridor, Step, Parking area & etc.

INSTALLATION:

1.Keep Sensor unit 1.6 Mtr higher from the ground level. 2. Lights such as incandescent lamp which emits high heat should be kept from the switch always, or it will cause the light to turn on/off voluntarily. 3. On being fixed to the wire for first time, the switch initialization will take 1-2 minutes. It's natural for the switch to turn on/off voluntarily. 4. When you install the switch on daytime, the Default State of the switch will make the light off. Keep the detector of the switch from illumination, & then the light will turn ON. The darker, the switch will be more sensitive. If it is not very sensitive, turn the yellow port counterclockwise with a long and thin tool to get a proper light sensitivity.

PACKAGE INCLUDES: 1 x Infrared Switch Board, 1 x Wall /Ceiling fitting Plate , 1 x Installation Manual , 2 x Mounting Screw , Bill Feel Free to call us.

Product Feature:
PIR Motion Sensor: Works by detecting human motion infrared rays Light Sensor: 3LUX~2000LUX adjustable, Can work in day and night. Time Delay: 10sec-7min adjustable, Time-Delay is added continually, when it receives the second induction signals after the first induction, it will compute time once more on the basic of the first time-delay rest. Detection Range: 3-7m adjustable, can be adjusted accordingly, item fits for large room.

PRODUCT INSTALLATION:

1.Keep Sensor unit 1.6 Mtr higher from the ground level.
2. The light, such as incandescent lamp which emits high heat should be kept from the switch aways, or it will be turn on/off voluntarily.
3. On being fixed to the wire first time, the switch' initialization will take 1-2 minutes. It's natural for the switch to turn on/off voluntarily.
4. When you install the switch on daytime, the Default State of the switch will make the light off.Keep the detector of the switch from illumination, & then the light will turn ON. The darker, the switch will be more sensitive. If it is not very sensitive, turn the yellow port counterclockwise with a long and thin tool to get a proper light sensitivity.